Additives for Tinting Formulations

Additives for Tinting Formulations

Updated: Dec 17, 2019

Comparison of Lankem Dispersants vs a Leading Competitor in the production of Aqueous Tinters.

A comparison was made using Pigment Red 122 quinacridone magenta at 25% pigment, the tinters were dispersed on a laboratory bead mill for 60 mins, the only difference to the formulation is the dispersants. The pigment content, processing time and conditions were identical, as the drawdown shows the Lankem product gives increased strength, better gloss and zero flocculation over the competitive product. Trials have been carried out on several high surface area pigments giving similar results showing, increased strength, better gloss and zero flocculation.

Formulation Guide: %

Pigment Red 122 25

Lansperse DS200W 10

Lansperse DS80 2.3

Mono Ethanolamine 0.2

Monopropylene Glycol 8

Buty Di-Glycol 4

Kelsan Solution (5% Xantham Gum in water) 50.5

Method of Manufacture:

· High speed stirs all liquids add pigment HSS for 30 mins

· Leave to wet for 30 mins HSS for 2 mins

· Bead mill until fully dispersed

Lankem Logo